Adlink CoreModule 430 Uživatelský manuál stáhnout pdf (Strana 16)

Chapter 2 Product Overview

10 Reference Manual CoreModule 430

Header, Connector, and Socket Definitions

Table 2-2 describes the headers shown in Figure 2-5.

Figure 2-4. Connector Pin Identifications

Table 2-2. Header, Connector, and Socket Descriptions

Jack/Plug # Access Description

P1A/1B & P1C/1D –

PC/104 Bus

Top/

Bottom

104-pin, 0.100" (2.54mm) connectors for PC/104 (ISA) bus

J2 – Ethernet Top 8-pin, 0.100" (2.54mm), right-angle header for Ethernet interface

J3 – Serial 1 (COM1) Top 10-pin, 0.100" (2.54mm), right-angle header for Serial 1 interface

J4 – Parallel (LPT) Top 26-pin, 0.079" (2mm), right-angle header for Parallel interface

J5 – Utility Top 10-pin, 0.100" (2.54mm), right-angle header for Utility interface

J6 – IDE Top 44-pin, 0.079" (2mm) header for IDE interface

J7 – Power Top 10-pin, 0.100" (2.54mm), right-angle header for Power

connection

J8 – GPIO (User) Top 10-pin, 0.079" (2mm) header for User defined GPIO signals

J9 – Serial 2 (COM2) Top 10-pin, 0.100" (2.54mm), right-angle header for Serial 2 interface

J10 – USB0 Top 5-pin, 0.100" (2.54mm), right-angle header for USB0 interface

J11 – Video Top 44-pin, 0.079" (2mm), right-angle header for LCD/CRT interface

J12 – Compact Flash Bottom 50-pin, 0.050" (1.27mm) socket for Type I or II Compact Flash

cards

J13 – Serial 4 (COM4) Top 10-pin, 0.100" (2.54mm) header for Serial 4 interface

J14 – Serial 3 (COM3) Top 10-pin, 0.100" (2.54mm) header for Serial 3 interface

J15 – DNP Top Do not populate

J17 – USB1 Top 5-pin, 0.079" (2mm) header for USB1 interface

J19 – SPI Top 6-pin, 0.100" (2.54mm) header used for SPI Flash programming

J20 – LPC Top 10-pin, 0.079" (2mm) header for LPC signals

NOTE The pinout tables in Chapter 3 of this manual identify pin sequence using the

following methods: A 10-pin header with two rows of pins, using odd/even

numbering, where pin 2 is directly across from pin 1, is noted as 10-pin, 2 rows, odd/

even (1, 2). Alternately, a 20-pin connector using consecutive numbering, where pin

11 is directly across from pin 1, is noted in this way: 20-pin, 2 rows, consecutive (1,

11). The second number in the parenthesis is always directly across from pin 1. See

Figure 2-4.

20-pin, two rows,

Consecutive, (1, 11)

124

15 1120

20-pin, two rows,

Odd/Even, (1, 2)

CM430_ConNum_a

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Adlink CoreModule 430 Uživatelský manuál Strana 16

Komentáře k této Příručce

Související produkty a manuály pro Hardware Adlink CoreModule 430